№3-4 2016


Welding surround structures of aluminum alloys nanopowder electrodes with a fibrous structure


1,2G.G. Krushenko, 2G.V. Dvirniy, 2S.N. Reshetnikova


1Institute Computational Modeling SB RAS
Krasnoyarsk, Russian Federation
2Reshetnev Siberian State Aerospace University
Krasnoyarsk, Russian Federation


In the manufacture of aircraft structures made of aluminum alloys used welding, physical essence of which is to obtain a permanent connection by melting and co-crystallization of the welding electrode materials and parts to be joined. While the structure of the weld and the joined parts of the influence of heat coarsened, which leads to a reduction in the mechanical properties of the welded articles. It is known that metal with fine-grained structure have higher mechanical properties compared with coarse. Thus in practice, for the purpose of foundry castings structure refinement is used modification, the essence of which consists in introducing into the liquid metal alloys using substances which serve as crystallization centers. However, the possibility of modifying such agents have reached the limits in recent years and have found a new method of modifying the application using nanopowders (NP) chemical compounds (nitrides, carbides, borides, oxides), which gives a high effect of enhancing the mechanical properties of the molded articles. Bearing in mind the fact that the mechanism of crystallization of molded articles and weld identical technology modifying liquid alloy used to grind the weld structure in the manufacture of a welded structure of the aircraft from the example sheets of aluminum-magnesium alloy AMg6 with welding rods containing NP. The test results are cut from the welded structure samples showed that σв metal at the weld joint during the welding rod comprising NP were higher than the samples have AMg6 alloy, welded by the standard electrode of the same alloy.


aircraft, aluminum alloys, welding


[1] Hartman D. A., Dave V. R., Cola M. J. In-process quality assurance for aerospace welding // Welding Journal. 2009. Vol. 88, N 1. P. 28–31.

[2] Parshin S. G. Jelektrodugovaja svarka s primeneniem aktivirujushhih fljusov [Arc welding using activating fluxes]. Samara : Samarskij nauchnyi centr RAN, 2006. 380 p.

[3] Hall E.O. The deformation and Ageing of Mild Steel: III. Discussion of Results // Proceeding of the Physical Society. Section B. 1951. Vol. 64, N 9. P. 717–753.

[4] Petch N. J. The Cleavage Strength of Polycrystals // Journal of Iron and Steel Institute. 1953. Vol. 174. P. 25–28.

[5] Bondarev B. I., Napalkov V. I., Tararyshkin V. I. Modificirovanie aljuminievyh deformiruemyh splavov [Inoculation of wrought aluminium alloys]. Mosvow : Metallurgija, 1979. 224 p.

[6] Morohov I. D., Trusov L. I., Chizhik S. P. Ul'tradispersnye metallicheskie sredy [Ultrafine metal environment]. Moscow : Atomizdat, 1977. 264 p.

[7] Krushenko G. G. Sposob modificirovanija aljuminievo-kremnievyh splavov [The method of inoculation of aluminumsilicon alloys]. Patent RF, no. 2475550, 2013.

[8] Krushenko G. G., Fil'kov M. N., Balashov B. A. i dr. [Refinement of the structure of the alloy D16 when modifying the bars with ultra-fine powders]. Cvetnaja metallurgija. 1991. N 4. P. 8–10. (In Russ.)

[9] Saburov V. P., Cherepanov A. N., Krushenko G. G. i dr. Plazmohimicheskij sintez ul'tradispersnyh poroshkov i ih primenenie dlja modificirovanija metallov i splavov [Plasmachemical synthesis of ultradispersed powders and their application for modification of metals and alloys]. Novosibirsk : Nauka. Sibirskaja izdatel'skaja firma RAN, 1995. 344 p.

[10] Krushenko G. G. Sposob izgotovlenija jelektrodnoj provoloki dlja svarki aljuminievyh splavov [A method of manufacturing an electrode wire for welding of aluminium alloys]. Patent RF, no. 2429958, 2011.

[11] Brodovich N. V., Obuhov A. V. Sposob izgotovlenija puchkovyh jelektrodov [A method of manufacturing a beam-type electrodes]. Patent RF, no. 87411, 1949.

[12] Ishak M., Maekawa K., Yamasaki K. The characteristic of laser welded magnesium alloy using silver nanoparticles as insert material // Materials Science and Engineering: A. 2012. Vol. 536. P. 143–151.

[13] Vozdejstvie vysokokoncentrirovannyh potokov jenergii na materialy s cel'ju izmenenija ih fiziko-himicheskih svojstv i uluchshenija jekspluatacionnyh harakteristik. Sibirskoe otdelenie RAN v 2007 godu [The impact of highly concentrated streams of energy to materials to change their physical-chemical properties and improved performance. Siberian branch of the Russian Academy of Sciences in 2007]. Novosibirsk : Izdatel'stvo SO RAN, 2008. P. 138–139.

[14] Boldyrev A. M. [The interaction of titanium dioxide with the welding bath during automatic submerged-arc welding of steel 10KHSND with metallogenically additive]. Svarochnoe proizvodstvo, 2014, no. 9. P. 14–19. (In Russ.)

[15] Krushenko G. G., Fil'kov M. N. [Technology for producing aluminum composite material with a high content of reinforcing powders]. Vestnik SibGAU. 2011, no. 1. P. 139–142. (In Russ.)

[16] Testoedov N. A., Turkenich R. P., Dvirnyy G. V. i dr. [New opportunities welding technology for the space industry]. Materialy XI Mezhdunarodnoy nauchn. konf «Reshetnevskie chteniya» [Materials XI Intern. Scientific. Conf «Reshetnev reading»]. Krasnoyarsk : SibGAU, 2007. P. 135–136.

For citing this article

Krushenko G.G., Dvirniy G.V., Reshetnikova S.N. Welding surround structures of aluminum alloys nanopowder electrodes with a fibrous structure // The Research of the Science City, 2016, no. 3-4, pp. 32-38.

Creative Commons License
This Article is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).