Article


Cover

№3 2023

Title

Mathematical modeling of cross-corrugated waveguide shell formation

Authors

V.V. Timofeev, I.V. Trifanov, E.V. Patraev

Organization

Reshetnev Siberian State University of Science and Technology
Krasnoyarsk, Russian Federation

Abstract

Flexible cross-corrugated shells are used to create flexible waveguides that connect rigid waveguides. They compensate for mounting stresses during assembly, provide temperature compensation and vibration damping. These waveguides are widely used in spacecraft communication systems, they are required – flexibility, mechanical strength, geometric accuracy and minimal energy loss when connected to the transmission line. In this paper, the process of corrugating rectangular profile pipes made of BrB 2 bronze to create transversely corrugated shells is investigated. Objectives of the work: 1) analysis of technological processes of corrugation of waveguide pipes to select the most accurate method; 2) conducting a numerical experiment to determine technological parameters. Based on the analysis of the methods of transverse corrugation, the most rational method of corrugation with a liquid punch on a solid matrix has been incorporated. The scientific novelty lies in the creation of a mathematical model based on the theory of bending moments and beam stretching. With its help, a mathematical experiment was carried out, which has an applied benefit for the calculations of technological operations, for the corrugation of a waveguide. The pressures necessary for corrugation for different corrugation geometries are found and patterns are revealed. The mathematical model has an applied use for preliminary calculations of technological operations of corrugation of rectangular pipes. The calculation allows you to choose the most optimal mode of the technological process: fluid pressure, deformation, change in yield strength, allowing you to produce a flexible waveguide qualitatively. The result of the calculations is useful in preliminary design to determine the size of the corrugating equipment and the effort required to implement the technological process of forming the corrugations of rectangular pipes.

Keywords

waveguide, pressure, plastic deformation, yield strength, mathematical modeling, liquid stamping, cross-corrugated shells.

References

[1] Izgotovlenie gibkikh volnovodov dlya kosmicheskikh apparatov [Manufacture of flexible waveguides for spacecraft]. Available at: https://tmnpo.ru/node/654 (accessed 22.05.2023).

[2] Izgotovlenie gofrirovannykh volnovodnykh trub [Manufacture of corrugated waveguide pipes]. Available at: https://studfile.net/preview/1676197/page:9/ (accessed 22.05.2023).

[3] William A. Imbriale, Steven Gao, Luigi Boccia. Space Antenna Handbook // John Wiley & Sons Ltd. United Kingdom, 2012. P. 768.

[4] GOST 20900–2014. Mezhgosudarstvennyy. STANDART. Truby volnovodnye mednye i latunnye pryamougol'nye. Tekhnicheskie usloviya. [State Standard 20900–2014. Interstate. standard. Copper and brass rectangular waveguide pipes. Technical conditions]. Vzamen GOST 20900–75; Vved. 2015–09–01. M.: Standartinform Publ., 2015. 17 p.

[5] GOST 1789–2013. Mezhgosudarstvennyy. STANDART. Polosy i lenty iz berilievoj bronzy. Tehnicheskie uslovija. [Interstate. standard. Beryllium bronze strips and ribbons. Technical conditions]. Vzamen GOST 1789–70; Vved. 2015–09–01. M.: Standartinform Publ., 2014. 17 p.

[6] Akimov P.A., Mozgaleva M.L. Mnogourovnevye diskretnye i diskretno-kontinual'nye metody lokal'nogo rascheta stroitel'nykh konstruktsiy: monografiya [Multilevel discrete and discrete-continuous methods of local calculation of building structures: monograph]. M., MGSU., 2014, 632 p. ISBN 978–5–7264–0907–8

[7] Isachenkov E.I. Shtampovka rezinoj i zhidkost'ju. [Rubber and liquid stamping]. M.: Mashinostroenie, 1967. 367 p.

[8] "Spravochnik po soprotivleniyu materialov." – chitat' interesnuyu knigu avtora (Pisarenko G.S. i dr.) ["Handbook on the resistance of materials." – read an interesting book by the author (Pisarenko G.S. et al.)]. Available at: https://reallib.org/reader?file=678387&pg=142 (accessed 22.05.2023).

[9] Grohovskij D.V. Osnovy gidravliki i gidroprivod [Fundamentals of hydraulics and hydraulic drive] Textbook. – St. Petersburg: Polytechnic, 2013.– 236 p.: ill. ISBN 978–5–7325–0962–5

[10] Loginov Yu.N. Med' i deformiruemye mednye splavy: uchebnoe posobie [Copper and Wrought Copper Alloys: A Study Guide] 2-e izd., ster. Ekaterinburg: GOU VPO UGTU-UPI, 2006. 136 p.

[11] Skaner mekhanicheskikh napryazheniy STRESSVISION® [Mechanical Stress Scanner STRESSVISION®] Available at: https://stressvision.ru/ (accessed 22.02.2023).

[12] Trifonov I.V., Oborina L.I., Bakin A.M. Teoreticheskie osnovy postroeniya i metody ispytaniy antenno-fidernykh ustroystv sredstv svyazi, priborov kontrolya i obnaruzheniy [Theoretical foundations of construction and test methods of antenna-feeder devices of communication means, monitoring and detection devices] textbook. SibGAU. Krasnoyarsk, 2010. 108 p.



For citing this article

Timofeev V.V., Trifanov I.V., Patraev E.V. Mathematical modeling of cross-corrugated waveguide shell formation // Spacecrafts & Technologies, 2023, vol. 7, no. 3, pp. 211-219. doi: 10.26732/j.st.2023.3.05


Creative Commons License
This Article is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).