Article

Cover

Title

Determination of stresses and forces arising during the technological process of stretching small-section pipes through a roller die using a mandrel tool

Authors

V.V. Timofeev, E.V. Patraev, I.V. Trifanov

Organization

Reshetnev Siberian State University of Science and Technology
Krasnoyarsk, Russian Federation

Abstract

For the transmission of microwave energy and in various precision instruments, pipes with a small cross section are often used, which can be part of the waveguide paths of antenna-feeder devices of spacecraft. Drawing a tubular billet through a mandrel roller die is a reliable and technologically advanced method of manufacturing rectilinear sections of a waveguide path. The purpose of the study is to develop a methodology for calculating stresses in a tubular billet and drawing forces, taking into account friction and changes in the yield strength of materials. The study was conducted by mathematical modeling. The method of successive approximations was used for the calculation. An algorithm has been compiled and the basic formulas for determining the desired parameters are given. Calculations were carried out for pipes with a rectangular cross section of 3.6 x 1.8 mm made of M4 and L63 alloys, the forces arising during stretching in the mandrel, rolls and total stretching forces were determined. The patterns that arise during the technological process are identified and justified on the basis of calculations. The influence of the geometry and materials of the workpieces on the main technological parameters is definitely determined. The calculation model can be used to simulate the technological process in the manufacture of small-section pipes made of other metals, taking into account changes in their yield strength during deformation. The calculation method can be used to determine the rational modes of drawing pipes of small cross-section.

Keywords

small section pipe, waveguide, broaching, sequential approximation method, deformation, yield strength

References

[1] Zlobin S. K., Mikhnev M. M., Laptenok V. D., Bocharov A. N., Dolgopolov B. B. [Features of production of waveguide-distribution paths of antenna-feeder devices of space vehicles]. Vestnik SibGAU. 2013, No 6, P. 196–201 (In Russ.)

[2] Volnovodnyy trakt. [Waveguide path]. Available at: http://npo-prz.ru/index.php?option=com_content&view=article&id=66:2011–03–28–13–42–17 (accessed 22.02.2023).

[3] Malkov N. A., Pudovkin A. P. Ustrojstva sverhvysokih chastot: ucheb. Posobie [Ultrahigh frequency devices: a textbook] Tambov. Izd-vo Tamb. gos. tehn. un-ta, 2008. 92 p. 100 copies. ISBN 978–5–8265–0735–3.

[4] GOST 20900–2014. Mezhgosudarstvennyy. STANDART. Truby volnovodnye mednye i latunnye pryamougol’nye Tekhnicheskie usloviya. [State Standard 20900–2014. Interstate. standard. Waveguide copper and brass rectangular pipes Specifications.] Vzamen GOST 20900–75; Vved. 2015–09–01. Moscow: Standartinform Publ., 2015. 17 p.

[5] Izgotovlenie volnovodnykh trub pryamougol’nogo i kruglogo poperechnykh secheniy [Manufacture of waveguide tubes of rectangular and round cross sections] (In Russ.). Available at: https://studfile.net/preview/1676197/page:2/ (accessed 16.01.2024).

[6] Trifanov I. V., Babkina L. A., Golenkova A. A. Perspektivnye tekhnologii povysheniya kachestva rabochey poverkhnosti detaley volnovodov i luchevodnykh liniy: uchebnoe posobie [Promising technologies for improving the quality of the working surface of waveguide parts and beam lines: a textbook] Krasnoyarsk, SibGAU, 2004, 92 p.

[7] Termicheskaya obrabotka medi i ee splavov [Heat treatment of copper and its alloys] (In Russ.). Available at: https://studref.com/626301/tehnika/termicheskaya_obrabotka_medi_splavov (accessed 16.01.2024).

[8] L63 latun’, obrabatyvaemaya davleniem [L63 pressure-treated brass] (In Russ.). Available at: https://studref.com/626301/tehnika/termicheskaya_obrabotka_medi_splavov (accessed 16.01.2024).

[9] Trifanov V. I., Oborina L. I., Sukhanova O. A., Melkozerov M. G., Trifanov I. V. [Research of process parameters and temperature reading characteristics in the manufacture of waveguides of EHF?band] Sovremennye naukoemkie tekhnologii, 2018, № 11–2, P. 222–226 (In Russ.).

[10] Orlov G. A. Osnovy teorii prokatki i volocheniya trub: uchebnoe posobie [Fundamentals of the theory of rolling and drawing pipes: a textbook] Ekaterinburg. Izd-vo Ural. un-ta, 2016. 204 p.

[11] Malinin N. N. Tehnologicheskie zadachi plastichnosti i polzuchesti: uchebnoe posobie dlja bakalavriata i magistratury. 2-e izd., ispr. i dop. [Technological problems of plasticity and creep: a textbook for undergraduate and graduate studies. 2nd ed., ispr. and add.]. M.: Izdatel’stvo Jurajt, 2018. 121 p.

[12] Loginov Yu. N. Med’ i deformiruemye mednye splavy: uchebnoe posobie [Copper and Wrought Copper Alloys: A Study Guide] 2-e izd., ster. Ekaterinburg: GOU VPO UGTU-UPI, 2006. 136 p.

[13] Tret’yakov A. V, Zyuzin V. I. Mekhanicheskie svoystva metallov i splavov pri obrabotke davleniem: Spravochnik. [Mechanical properties of metals and alloys during pressure treatment: Handbook.] M.: Metallurgiya, 1973. 224 p.

[14] Skaner mekhanicheskikh napryazheniy STRESSVISION® [Mechanical Stress Scanner STRESSVISION®] Available at: https://stressvision.ru/ (accessed 22.02.2023).

[15] Trifonov I. V., Oborina L. I., Bakina A. M. Teoreticheskie osnovy postroeniya i metody ispytaniy antenno-fidernykh ustroystv sredstv svyazi, priborov kontrolya i obnaruzheniy [Theoretical foundations of construction and test methods of antenna-feeder devices of communication means, monitoring and detection devices] textbook. SibGAU. Krasnoyarsk, 2010. 108 p.

For citing this article

Timofeev V.V., Patraev E.V., Trifanov I.V. Determination of stresses and forces arising during the technological process of stretching small-section pipes through a roller die using a mandrel tool // Spacecrafts & Technologies, 2024, vol. 8, no. 2, pp. 81-90.

This Article is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).